Troubleshooting guide

3
INTRODUCTION
Dear Customer,
Welcome to the family of Aqua Products and congratulations on purchasing the most reliable pool cleaner technology on the market today!
Your new cleaner is a fully automatic, “robotic” mobile filtration system engineered with the patented SimplyReliable™ hydraulic jet
drive propulsion system. Working without any of the complex circuitry or wearable drive components found on all other cleaner types
your cleaner eliminates the hassle of hoses, the expense of costly to run booster pumps and works independently external pump and
filtration systems to save you money and time. To get the most out of your investment, be sure to read this operator manual as you will
find within it tips on how to keep your robot running smoothly to continue to save you money for years to come. Feel welcome to visit
our site at AquaProducts.com for the latest product information, including additional savings tips, troubleshooting videos and more.
How it Works
Rather than connecting to your pool’s filter or requiring a booster pump, your cleaner is equipped with its own built-in Pump Motor that
provides it the ability to vacuum dirt and debris independently. An internal, reusable Filter traps the debris allowing only clean water to
pass through. The filtered water that is expelled is efficiently used to hydraulically drive or jettison your cleaner about the pool. Simple.
Reliable. Effective. Efficient.
1. Water is sucked up into the pump at a rate of up to
4800 Gallons Per Hour.
2. Debris is swallowed and trapped into the
Internal Filter Bag via the offset Intake Ports
on the Bottom Lid Assembly.
3. Power Washing Hydro-Jets* help lift up the
fine particles off the pool’s surface and direct
the debris into the path of the Intake Ports to
be vacuumeed into the internal Filter Bag.
4. High pressure filtered, clean water travels
out of one of the Exit Valves and Jet Propulsion
forces your cleaner to move in that direction.
*
Note: Hydro-scrubbing Jets are NOT available on all models.