Operator`s manual

9
SETTING THE “LOCK PIN” TO CHANGE THE CLEANING PATTERNS
1. Default Lock Pin setting. Your Jet cleaner will
travel forward in a straight line, once the Auto Jet
Propulsion system changes direction the Jet cleaner
will reverse in a slight arc pattern and continue to
repeat this cleaning pattern, systematically covering
the entire pool floor.
2. Make sure the Lock Pin is securely positioned in
the hole provided.
3. To create a tighter arc and adjust the cleaning pat-
tern, remove the Lock Pin from the the forward hole
(see fig. 1a) and place the Lock Pin in the second
hole provided (see figure 1b). Make sure the Lock
Pin is securely positioned in the hole provided.
4. The Jet cleaner will now travel forwards in
a straight line and will reverse in a tighter arc
pattern, therefore creating sharper turning angles
and adjusting the cleaning pattern in order to cover
the entire pool floor.
Figure 1a
Figure 1b
CLEANING PATTERN RECTANGULAR POOL
CLEANING PATTERN CIRCULAR POOL