Operator`s manual
2
TABLE OF CONTENTS
JET CLEANERS
Introduction ...................................................................................................................................... 2
Operating Features .......................................................................................................................... 3
Power Supply Units ......................................................................................................................... 4
Knowing / Using Model Features ................................................................................................... 5
Next Generation Bottom Lid Assembly ......................................................................................... 6
Operating Instructions ..................................................................................................................... 7
Setting the Digital Timer .................................................................................................................. 8
Setting the Lock Pin to Change Cleaning Patterns ........................................................................ 9
Cleaner Maintenance ....................................................................................................................... 10
Troubleshooting ............................................................................................................................... 11- 1 2
Regsistration & Assistance ............................................................................................................. 13
INTRODUCTION
Dear Customer,
Congratulations! You have purchased one of the best pool cleaners that technology has to offer! Your new
cleaner is a fully automatic, “robotic” in ground pool cleaner engineered with the patented powerful water jet
drive propulsion system. Please read the following carefully so that you are fully aware of all the capabilities
and features your pool cleaner has to offer.
How does your cleaner work?
The simple yet powerful built-in pump motor operates the suction power, the power washing jets
and the jet drive propulsion of your cleaner. Power washing jets directed at the pool’s surface under-
neath the cleaner flush up dirt and debris for the suction power to easily vacuum this into its body
and be filtered by its easy-to-clean, internal reusable filter bag system. A simple patented sliding axle
system allows your cleaner to alternate between straight and curved movements, allowing it to clean
any pool shape in most cases in less than one hour. Since the dirt is trapped within your cleaner’s
internal filter and not your pool’s filter, all that is needed is the occasional removal, emptying and
rinsing clean of this filter bag as opposed to the constant costly and time consuming cleaning of your
main pool filter, saving you from the loss of hundreds of gallons of treated water annually and from
this water entering and harming the environment.
Never operate your cleaner when it is not totally submersed in the pool water! Doing so may cause severe
damage to motors and require costly repairs!
Never allow anyone to swim in the pool while the cleaner is in the pool!
WARNING: Using the Floating Cable to lift the cleaner out of the water will cause severe damage to your cleaner and
may result in costly repair!
WARNING: The Power Supply must be placed at least 12 feet / 4 meters from the pool’s edge!
WARNING! A Ground Fault Circuit Interrupter (GFCI) / Residual Current Device (R.C.D), must be installed to
protect your electric outlet and to prevent and possible electrical shock!