Operating instructions

Lock Pin
Curves counter
clockwise in
this direction
Lock Pin in
preset position
(Top View)
Goes straight
in this direction
Curves on a
greater angle in
this direction
In Preset
position, the
unit will clean
in this counter-
clockwise pattern
of moving straight
in one direction and
arcing slightly in the
reverse direction
Cleaning Pattern 1
Cleaning Pattern 2
Goes straight
in this direction
Please Note: After your unit completes its
cleaning cycle, remove it from the pool
and transfer the Lock Pin to the opposite
side of the Turning Wheel Axle. Once this
is complete, the next time you use
your unit, it will clean in the opposite
direction of the prior use.
In Forward
position, the
unit will clean
in this pattern of
moving straight in
one driection and
arcing slightly in the
reverse direction.
Lock Pin in
Forward position
Fixed
Axle
Turnign Wheel Axle
Fixed
Axle
Turning Wheel Axle