Troubleshooting guide

PRODUCT SETTINGS and TROUBLESHOOTING
After you have cleaned the filter bags of the collected debris, you’ll need to
re-install them back into the cleaner. Make sure the elastic opening covers all
the way over the opening and that the Velco® end is secure.
The filter bag should stretch all the way out from end to end. See the diagram
for proper placement.
NOTE: Your filter bag is machine washable. Make sure you rinse off
any leaves, twigs and larger debris before doing so. Please wash in
cold water only. You may use detergent if necessary.
PRODUCT SETTINGS
RE-INSTALLING FILTER BAGS AFTER CLEANING
Top View of
Inside the cleaner
Push tabs down and outward. This will remove the cover
and expose the filter bags.
Remove filter bags from inside cleaner by gently pulling on
the elastic band around the suction ports.
Pull tabs to undo Velcro® and turn the filter bag inside out Use a garden hose to clean filter bag.
1 2
43