Troubleshooting guide

10
Table 4 - Test Bench Specications
TEST CONDITION SPECIFICATIONS
Immersion Test
Supply Pressure 2500 - 3000 psi
(176-206 bar)
No leaks
Medium Pressure
Supply Pressure 2500 - 3000 psi
(176-206 bar)
MP at 130 - 145 psi (9-10 bar)
MP Variation
Supply Pressure 2500 - 3000 psi
(176-206 bar)
After cycling the regulator several times,
the MP should not increase by more than
5 psi in 5 - 15 seconds.
Table 3 - Torque Specications
PART # DESCRIPTION / KEY ITEM # TORQUE
125712 Piston Cap / 2 18 ft/lbs / 24.5 Nm
125716 Inlet Fitting / 16 18 ft/lbs / 24.5 Nm
103133 MP Port Plug / 10 40 in/lbs / 4.5 Nm
103137
HP Port Plug / 19 40 in/lbs / 4.5 Nm
APF124563
Interstage Hose 40 in/lbs / 4.5 Nm