Installation Guide

Install faucet, do not tighten, measure the
distance from the bottom of the faucet
shank to the oor and subtract 2-5/8”, cut
the supply line at that line.
Install supply lines on faucet.
It may be necessary to loosen tub faucet
to allow enough space to insert supply
line into straight stop valve. Insert brass
nut, metal washer and rubber washer
as shown on the supply line installation
manual. Apply Teon tape to the threads,
insert supply line and tighten brass nut
to properly secure the supply line into
the straight stop valve. Make sure supply
line is plumb to the straight stop valve,
this will prevent possible leaks. Tighten
faucet securely.
4
5
6