Installation & Assembly

www.aquagallery.comCopyright © Aqua Creations
1
1. Install the ball bearing mechanism on the wall 69 in from the oor.
2. Insert the hammock into ball bearing and fasten the two Allen screws using the key provided.
3. Oil the ball bearing through the outsid screw hole opening. You may use any lightweight oil, such as
three - in - one from WD - 40.
4. Attach the pillow on the hammock body: Fasten the velcro stripes and laces.
Ball bearing
175cm / 69in
Satala
Hammock
Feb 2018
General use and maintnance tips:
1. To rock,make sure the hammock is perpendicular to the wall.
2. About one to four weeks after installation’ check to see if the ball bearing needs oiling. To oil it, use the
outside screw hole opening. You may use any lightweight oil, such as three-in-ome from WD - 40.
3. Oil the ball bearing once every six months, or more if needed.
4. To clean the pillow “duvet cover”, remove from hammock’ nd pull out the three individual goose - down
pillows. You may machine wash or dry cleanthe duvet cover depending on the type of fabric you have.
Silk Lighting Maintenance: All Lampshades in the Silk Lighting Collections are made of hand dyed, treated crushed silk that is resistant to mold and fire. The silk is sculpted over
a metal structure. For optimal maintenance, vacuum the silk frequently and avoid direct sunlight or smoke. To remove stains use upholstery foam cleaner. (As these vary depending
on manufacturer, testing the product on a hidden spot is recommended)