Owner's manual

Residential Series

Submittal Data

AB6036SH

View -

ht Hand Shown

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

56½" I.D.

28¼"

35½"

I.D.

18"

Ribbed Bottom For

Slip Resistance

Important Note:

Aqua Bath Recommends The Use Of A

Slide Bar As An Accessory In The Unit Rather

han The Use Of A Glide Bar / Glide Rail.

51¼"

60"

20"

83"

84"

36" O.D.

35½" I.D.

26"

80"

7¾" Threshold

ront View and Ri

ht Side View

Note: Manufacturing Tolerance Of (±1/4”) Due To The Nature Of The Materials Used

Installation: Detailed installation instructions are contained in this catalog, and provided with each unit shipped.

The field installation instructions must be followed as directed or may void manufacturers warranty

Reference installation instructions for AB6036SH.

Page AB-14

12/08

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446

www.aquabath.com

PAGE 1
Ribbed Bottom For Slip Resistance 35½" I.D. For additional information, call the Aqua Bath Customer Service Department At 1-800-232-2284 18" Residential Series 28¼" 56½" I.D. Submittal Data AB6036SH Top View - Right Hand Shown Important Note: Aqua Bath Recommends The Use Of A Slide Bar As An Accessory In The Unit Rather Than The Use Of A Glide Bar / Glide Rail. 84" 83" 80" 26" 20" 7¾" Threshold 51¼" 35½" I.D. 60" 36" O.D.
PAGE 2
For additional information, call the Aqua Bath Customer Service Department At 1-800-232-2284 Residential Series AB6036SH Model AB6036SH (AB6036SH-L valve on left, AB6036SH-R valve on right). The shower enclosure shall be Aqua Bath Model AB6036SH or AB6036SS and shall be molded from a single sheet of vacuum-formed .1875” one-piece sanitary grade acrylic so as not to have any joints or seams. Shall meet ANSI 124.2. Unit shall have a backside flame spread of less than 30 (Class B).