Owner manual

Important Note:

Aqua Bath Recommends The Use Of A

Slide Bar As An Accessory In The Unit Rather

han The Use Of A Glide Bar / Glide Rail.

51¼"

60" O.D.

46"

80"

83"

84"

18"

34"

15½"

34" O.D.

33½" I.D.

9¾"

16"

33½"

I.D.

Ribbed Bottom For

Slip Resistance

For additional information, call the

Aqua Bath Customer Service

Department At 1-800-232-2284

View -

ht Hand Shown

Residential Series

Submittal Data

AB6031-34TS

ront View and Ri

ht Side View

Note: Manufacturing Tolerance Of (±1/4”) Due To The Nature Of The Materials Used

Installation: Detailed installation instructions are contained in this catalog, and provided with each unit shipped.

The field installation instructions must be followed as directed or may void manufacturers warranty

Reference installation instructions for AB6031TS.

Page AB-2

12/08

AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446

www.aquabath.com

PAGE 1
33½" I.D. For additional information, call the Aqua Bath Customer Service Department At 1-800-232-2284 16" Ribbed Bottom For Slip Resistance 9¾" Residential Series Submittal Data AB6031-34TS Top View - Right Hand Shown Important Note: Aqua Bath Recommends The Use Of A Slide Bar As An Accessory In The Unit Rather Than The Use Of A Glide Bar / Glide Rail. 84" 83" 80" 46" 34" 18" 15½" 51¼" 33½" I.D. 60" O.D. 34" O.D.
PAGE 2
For additional information, call the Aqua Bath Customer Service Department At 1-800-232-2284 Residential Series AB6031-34TS Model AB6031-34TS (AB6031-34TS-L valve on left, AB6031-34TS-R valve on right). The tub/shower enclosure shall be Aqua Bath Model AB6031-34TS (and variations) and shall be molded from a single sheet of vacuum-formed .1875” one-piece sanitary grade acrylic so as to not have any joints or seams. Manufacturing Tolerance Of (1/4”) Due To The Nature Of The Materials Used.