User guide

13
As shown:
If the operation of the remote control becomes
unsatisfactory, replace the original battery with a new 3-volt
lithium battery.
1. Slide out the battery holder from
the remote control case.
2. Place one 3V CR205 battery
in the battery holder, observing the
polarity marking, if the battery is placed
incorrectly, the remote control will
not work. Dispose of the old battery
properly. Do not leave it lying around
where a young child or pet could pay
with or swallow it.
Battery may explode or leak if
mistreated, Do not attempt to reaching
it or disassemble it, Do not dispose of
the old battery in a fire.
3. Insert the battery holder into the battery
compartment.
NOTE: Please remove all of the batteries to prevent
damage or injury from possible battery leakage if the unit
will not be used for a long period of time. Use only the
specified size and type of battery.
Using the remote control to operate the product:
Aim the remote control directly at the remote control
sensor (IR) on the front panel. Don’t put any objects between
the remote control and the system while operating the unit.