User's Guide

29
equipment.
2. 3 G equipment should be due to external from the machine to the USB
interface take electricity, so in 3 G connection, please ensure that the battery power in
one case above.
Ethernet network Settings
1. Into the machine "Settings" under a "wireless and network", will be closed wifi
options.
2. Will USB Ethernet card through the special OTG line connected to the machine to
the USB interface, the system will automatically recognize and attached to the
network.
3. Into the machine "Settings" under the "Ethernet Settings" project and check the ""
Ethernet" option can.
4. If you need to specify the etheric network IP and gateway, can enter the "Ethernet
configuration" setting.
【Note】
1. Due to the different communication systems Ethernet card more, this machine
Ethernet function can't ensure that is compatible with all equipment.
2. Due to external Ethernet card equipment from the machine to the USB
interface take electricity, so in Ethernet connection, please ensure that the battery
power in one case above.