Product Info

Battery and Power Management 3-3
3
You cannot initialize two battery packs at the same time.
Recharging the Battery Pack
To recharge the battery pack, connect the AC adapter to the computer
and an electrical outlet.
To ensure the battery pack is charged to its full capacity, it is advisable to
keep the computer turned off during the recharging process. The battery
is fully recharged when all four bars of the battery indicator glow and the
frame stop flashing.
It takes, on average, 90 minutes to charge the battery pack to 80% of its
capacity. Two or three more hours are needed to charge it fully.
1. Recharging will not start if the battery temperature is below 0°C (32°F)
or above 45°C (113°F).
2. The recharging process will stop if the battery temperature rises above
60°C (140°F). It will continue when the temperature drops.
3. During recharging, do not disconnect the AC adapter before the battery
has been fully charged. This could result in a prematurely charged
battery.
4. After the battery has been fully recharged, do not immediately disconnect
and reconnect the AC adapter to charge it again. Doing so may damage
the battery.