Maintenance Notes

Getting Started 1-15

5. After booting up, the Qbe is ready to execute any command.

Adjusting the Display

You attain display clarity by:

Installing Software Drivers

A driver CD and/or supplement diskettes are supplied with your Qbe.

You need to install drivers for some special features of your Qbe to take

effect. (See Chapter on Driver Information)

Turning Off the Qbe

Do not turn off the computer when the disk drive indicator is on. You may lose

your data by doing so.

1. Make sure to save your data before exiting the program.

2. Remove any CD-ROM.

3. With Windows 98 that only provides the “Shut Down” command,

simply select this command. The computer will turn off

automatically.

Otherwise, press the power button. The computer will enter Power-

On-Suspend, Suspend-to-Disk, or power off mode depending on the

“Power Button Function” setting in the SCU program. (Default

setting is PowerOn Suspend.)

If you have to turn the computer on again immediately after turning it off, wait

for at least five seconds. Turning the computer rapidly off and on could cause

damage to it.