Maintenance Notes

1-12 Getting Started
1
Preparing the Computer for Operation
The Qbe runs on either external AC power or the rechargeable battery
power. For first time operation, you are advised to connect the AC
adapter for external power.
Installing the Battery Pack
The battery pack comes separately. Before you begin to use the
Personal Computer Tablet, you need to install the battery pack.
Follow this procedure to install the battery pack:
1. Make sure the computer is not turned on or connected to AC
power..
2. Slide the locking latch on the ride hand side of the Qbe to the
unlocked position and remove the bay cover.
3. Slide the battery pack into the bay.
(insert diagrams)
Figure 1-6. Installing the Battery Pack
5. Replace the cover. The locking latch should click into the locked
position.
Connecting to AC Power
Use only the AC adapter supplied with the computer. Using incorrect AC
adapters will damage the battery pack and the computer.
1. Make sure the Qbe is turned off.
2. Plug the DC power cord of the AC adapter into the AC power jack
(on the left side of the computer)
3. Plug the female end of the AC power cord into the AC adapter and
the male end into an electrical outlet.