How-To Guide

5
SCU Screen
Startup PowerManagement PassWord Device Features Utility Memory Exit
IDE Hard Drive : 2067 MB
IDE CDROM Drive: TOSHIBA CD-ROM
Secondary IDE : --
Serial Port 1 : 03F8h IRQ 04
SIR/FIR Port : 02F8h IRQ 11 DMA 00
Internal Modem : 03E8h IRQ 05
ECP/PIO Port : 0378h IRQ 07 DMA 07
Card Reader : 2 F8h IRQ 03
Touch Panel : 3 E8h IRQ 05
PCI Device 02 : 10D9 0531h LAN
PCI Device 03 : 104C AC16h PCMCIA
PCI Device 04 : 104C 8009h 1394
PCI Device 03 : 125D 1978h AUDIO
PCI Device 00A : 1023 939Ah VGA
Pentium-II CPU 300 Mhz
L2 Cache Size = 512 KB
Total DRAM Size= 32 MB
Bank 0 : SDRAM 32 MB
Bank 1 : None
Bank 2 : None
Bank 3 : None
Bank 4 : None
Bank 5 : None
Motherboard Rev. : 3
System BIOS Rev. : 0.19
Boot Block Rev. : 0.14
Keyboard BIOS Rev.: 2.00
Configure system startup options
<Cursor> key to select menu item
<Space> and <Enter> keys to toggle or activate menu item
The SCU screen consists of four areas:
 Menu bar is at the top of the screen. It contains menu titles for different
categories. When a title is selected, a pull-down menu appears containing
setup items. A check mark (√) in front of an item indicates "Enabled” and
a hyphen (-) indicates "Disabled”.. When an item with no mark in front is
selected, a sub-menu will pop up.
 Information area is the center area of the screen. This area displays the
system current configuration information. When a setup item is selected,
a sub-menu may appear in this area for you to make selections.
 Help is below the center area. It provides an explanation of the selected
item.
 Keyboard help is at the bottom of the screen. It gives keyboard
instructions for moving around and making selections.
Devices
System