Product Info

2-6 Operating Basics
2
1. In the MicroTouchscreen Properties Window, apply the pen tip or
your finger lightly to the word Calibration in the rectangular box:
Touch Pen or Finger Only depending on preference.
2 Apply the pen or finger tip to the four “target areas” at the corners of the
screen in either a clockwise or anti-clockwise direction.
3. After this, apply the pen or your finger tip to the small target area at
the center of the screen.
4. Click DONE.
Make sure that you do not touch the screen while calibration is
in process.
Transfer Mode:
Click on the SMI icon in the lower right hand corner.
A Window pops up – SMI Display Properties.
Rotation Off/OK
Rotation Recalibrate