Product Info

System Expansion 4-11

Connecting a MIDI Device or Joystick

Follow these steps to connect a MIDI device or joystick:

1. Make sure the computer is not turned on.

2. Plug the device cable into the MIDI/joystick connector on the

Porticle.

(graphics)

Connecting a MIDI Device/Joystick to the Porticle

Connecting a 1394 Device

Your Qbe has a 1394 connector . The IEEE 1394 standard describes a

serial bus driven by an advanced communication protocol which provides

faster data transmission rates and universal I/O interconnect.

Follow these steps to connect a 1394 device:

1. Make sure the Qbe is off.

2. Plug the cable into the 1394 connector at the back of the Qbe

(diagram)

Connecting a 1394 Device

3. Run the SCU program to activate the 1394 device by setting the

"Disable 1394 Device” item to disabled mode.