APWONE Electric Grain Mills Grinder Instructions 350G / 500G / 750G / 1000G / 2000G 1
General Information APWONE Grinder Structure Thank you purchasing APWONE Electric Grain Mills Grinder. Please read these instructions carefully for a thorough understanding of how the grinder operates. APWONE Electric Grain Mills Grinder is made of premium quality food grade 304 stainless steel with durable construction, intelligent control. Grinding powder fast, highly-efficient and easy operation.
Technical Parameter Product Usages Type: APWONE 350G/500G/750G/1000G/2000G Electric Grain Mills Grinder 1. Open the top cover (Clockwise to close, counterclockwise to open). Material: 304 Stainless Steel 2. Put the dry material into smashing body (according to different product Voltage: 110V-60HZ sizes and models). Motor Speed: 25000(r/min) 3. Close the cover, tighten two buckles. Working Time: 5 minutes 4. Adjust the red adjustment screw to tighten smashing body on base.
How to clean grinder How to change the carbon brush 1. Daily cleaning: Clean the residual powder with the included brush is ok. 2. Moderate cleaning: Scrub the machine and smashing body with a wringed Please find the carbon brush port on both side of the grinder. wet towel. Remember to use it again before all moisture is dry. 3. Deep cleaning: Wash the smashing body with a small amount of water.
Common Malfunction and Solutions Malfunction The engine doesn’t work after the power is on The engine makes a buzzing noise after electrify and blades turns slowly or even doesn’t work The engine surface is overheated and the stop working Reasons Attention and Warnings WET INGREDIENTS SHOULD BE DRIED FIRST BEFORE CRUSHED Solutions (Please cut off power before any operation) Poor power contact or power cord is loose Replace the power supply or socket LCD time display doesn’t work Plug in and press
. Please pull out the plug first when not in use or cleaning. DO NOT wash the cooling. machine directly with water. If you want to clean the smashing body, please clean 12. DO NOT turn on the timer switch when the cover is open. Remember do not it with the wooden brush daily and wash it according to our instructions. open the cover before power is off. 7. Please do not use the replacements parts which is not provided by us. If you 13.
