Product manual

4
NOTICE THE UNIT, WHEN INSTALLED, MUST BE ELECTRICALLY GROUNDED AND COMPLY WITH
LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL ELECTRICAL CODE
ANSI/NFPA 70-LATEST EDITION.
CANADIAN INSTALLATION MUST COMPLY WITH CSA-STANDARD C.22.2 No. 0 M1982 General Re-
quirements - Canadian Electrical Code, Part II, 109-M1981 - Commercial Cooking Appliances.
NOTICE Local codes regarding installation vary greatly from one area to another. The National Fire Protec-
tion Association, Inc. states in its NFPA 96 latest edition that local codes are "authority having jurisdiction"
when it comes to requirements for installation of equipment. Therefore, installations should comply with all
Local codes.
Model Width
in. (mm)
Depth
in. (mm)
Height
in. (mm)
No. of
Burners
BTU/kW
Per Burner
Total
BTU / kW
Hour
W.C.
in. (‘mbar’)
GGT-24 24 (610) 26 (661) 17-3/4(451) 2 25,000/7.3 50,000/14.6 6/10(15/25)
GGT-36 36 (915) 26 (661) 17-3/4(451) 3 37,500/11 75,000/22 6/10(15/25)
GGT-48 48 (1220) 26 (661) 17-3/4(451) 4 25,000/7.3 100,000/29.3 6/10(15/25)
GGM-24 24 (610) 26 (661) 16-3/4(426) 2 25,000/7.3 50,000/14.6 6/10(15/25)
GGM-36 36 (915) 26 (661) 16-3/4(426) 3 37,500/11 75,000/22 6/10(15/25)
GGM-48 48 (1220) 26 (661) 16-3/4(426) 4 25,000/7.3 100,000/29.3 6/10(15/25)
SPECIFICATIONS AND DIMENSIONS
Griddle Surface Dimensions
Model Width in./mm Depth in./mm
GGT-24 and GGM-24 23-13/16”/ 605 19-1/2”/ 496
GGT-36 and GGM-36 35-13/16”/ 910 19-1/2”/ 496
GGT-48 and GGM-48 47-13/16”/ 1215 19-1/2”/ 496
IMMEDIATELY INSPECT FOR SHIPPING DAMAGE
All containers should be examined for damage before and during unloading. The freight carrier has as-
sumed responsibility for its safe transit and delivery. If equipment is received damaged, either apparent or
concealed, a claim must be made with the delivering carrier.
A) Apparent damage or loss must be noted on the freight bill at the time of delivery. It must then be signed
by the carrier representative (Driver). If this is not done, the carrier may refuse the claim. The carrier can
supply the necessary forms.
B) Concealed damage or loss if not apparent until after equipment is uncrated, a request for inspection
must be made to the carrier within 15 days. The carrier should arrange an inspection. Be certain to hold all
contents and packaging material.
Installation and start-up should be performed by a qualified installer who thoroughly read, understands and
follows these instructions.
If you have questions concerning the installation, operation, maintenance or service of this product, write
Technical Service Department APW/Wyott Foodservice Equipment Company, P.O. Box 1829, Cheyenne,
WY 82003.
13
GGT Griddles, Parts Break Down
Item
Number
Description Part
Number
1 Griddle Weldment, -24H 218140-37
-36H 218140-38
-48H 218140-39
2 Firebox Weldment, -24H 218140-20
-36H 218140-21
-48H 218140-22
3 Leg Support, -24H 218131-14
-36H 218132-14
-48H 218133-14
4 Back Panel, -24H 218140-26
-36H 218140-27
-48H 218140-28
5 Front Panel, -24H 218140-23
-36H 218140-24
-48H 218140-25
6 Body Side Panel 218133-13
7 Drip Trough Weldment 218140-56
8 Grease Tray Guide, R.H. 300475-08
9 Grease Tray Guide, L.H. 300475-07
10 Grease Tray 218131-91
11 Burner, U Shape 20658-50
Burner, S Shape 20658-55
13 Knob 87056-00
14 Manifold Weld., -24H 218140-29
-36H 218140-30
-48H, 1 ea. 218140-31
-48H, 1 ea. 218140-29
15 Pilot Tube, Standing Pilot 218140-45
16 Safety Pilot Tube, -24 & -48 218140-47
-36 218140-48
17 Supply Tube, to Orifice 218140-43
18 Pressure Regulator, Conv. 20666-00
19 Nat. Orifice, #44 @ -24, -48 20668-44
Nat. Orifice, #37 @ -36 20668-37
L.P. Orifice, #54 @ -24, -48 20668-54
L.P. Orifice, #50 @ -36 20668-50
Item
Number
Description Part
Number
20 BJWA Valve 20001-00
21 Elbow, 1/4 CC x 1/8 MPT 20926-15
23 Coupling, 3/4 Pipe x 3” 20926-10
24 Plug, 1/8” Sq. Head 20925-17
25 Nipple, 3/4” Closed 20925-92
26 Elbow, 3/4” Black Pipe 20926-11
27 Captive Screw 31007-24
28 Captive Screw Retainer 81966-02
29 Captive Screw Receptacle 81966-01
30 Elbow, 1/4 MPT x 3/8 CC 20931-03
31 Elbow, 3/8-27 M x 3/8 CC 20926-14
32 Bracket, Orifice Mount 218140-19
33 Bracket, Pilot Mount 218140-36
34 Pilot Burner 20928-00
Pilot Orifice, Natural 20929-03
Pilot Orifice, L.P. 20929-02
35 Thermocouple 14731-03
36 Safety Pilot Valve 20927-02
37 Screw, #10-32 x 1/2” 81707-00
38 Screw, #8-32 x 3/8” 81531-00
39 Nut, #10-32 84171-00
41 Pipe, 3/4 Black x 23” Long 20926-13
42 4” Adjustable Leg 86320-00
43 Plug, 1/4 MPT 20925-53
44 Mounting Flange 20001-01
45 “D” Stem 20001-02
46 Screw, #10-24-x 1” 81854-00
47 Washer, Lock #10 85117-00
48 Thermostat Bulb Cover 217230-90
49 Thermostat Bulb Insulation 10180-44
50 Washer, Flat 5/16” 85093-00
51 Nut, 5/16-18 Hex 84362-00