Product Manual English
CONTENT FOREWORD 1 INSTRUCTION 1 INTRODUCTION 2 ITEM LIST 2 3 5 FEATURE NOMENCLATURE PREPARATION INSTALLATION SUNHOOD POWERING POWER ON/OFF SIGNAL INPUT MENU 6 6 6 7 7 7 8 EXTRA OSD 8 8 FIRMWARE UPDATE 8 SPECIFICATIONS 9 ACCESSING THE MENU
FOREWORD Thanks for purchasing Aputure V-Screen VS-2 FineHD! Aputure V-Screen VS-2 FineHD, a professional LCD Field Monitor designed for video equipments that offer HDMI ports, YPbPr outputs, or AV(Video, L, R) outputs, such as DSLR, and camcorder. And please read the user manual and keep it where all those who use this equipment will read them.
INTRODUCTION Aputure V-Screen VS-2 FineHD is a professional field monitor with a 7-inch Full HD LCD Screen (1920 x 1200 pixels), which provides diverse video interface, such as HDMI, YPbPr, and AV. As a multi-function monitor, VS-2 FineHD features False Color, Co-zebra, Peak, Histogram, Safe Area, and Volume Bar. ITEM LIST Before starting, please check that all the following items have been included with Aputure V-Screen VS-2 FineHD . If anything is missing, please contact your dealer immediately.
HDMI Cable(A Type to C Type) Power adapter cable HDMI Cable(A Type to D Type) Plug Firmware Update Cable Articulate Arm (includes 1/4 Screw, 1/4 Jack and Cold Shoe) * The Plug is desgined to charge the Battery with the Charger. FEATURE Co-Zebra Utilize both zebra marking and over exposure monitoring features to assist in exposure adjustment.
Volume Bar Monitor the volume in left and right channels. And it is marked by 3 colors, green, yellow, and red, depending the Volume Level. Center Mark The Center Mark can be displayed together with another marker, Safe Area. Safe Area A wide range of safe area displays and aspect ratios, 2.35:1/ 1.33:1/ 1.66:1/ 1.85:1/ 70%/ 80%/ 90%, can be selected. Flip The picture of the VS-2 FineHD can be freely flipped both vertically and horizontally.
NOMENCLATURE Front 1 2 3 4 5 6 7 1 Screen 5 Signal Switch 2 Mini USB Input 6 Navigator 3 Earphone Jack 7 Menu Button 4 Power Switch * The Mini USB Input can only be used for firmware update.
PREPARATION INSTALLATION 1) Mount monitor on your DSLR or camcorder with cold shoe out from articulate arm. 2) Mount VS-2 FineHD on articulate arm and connect them with any other equipment through 1/4” connector. *The articulate arm can be disassembled for various demands. 将遮阳罩按图示安装在监视器上，拉紧松紧带粘贴 SUNHOOD Affix the sunhood on the monitor with tape as shown by the picture.
POWERING As shown, slot the battery into the battery holder. * The following batteries are recommended: Sony NP-S Series: NP-F550/F570/F770/F960/F970, Sony NP-FM/QM Series: FM50/FM51/FM55H/FM500H/QM50/QM51/QM71D/QM91D. * You can also power it by a DC 7-18V through the input on the back of V-Screen. POWER ON/OFF First of all, please check VS-2 FineHD has connected the battery or adapter. Then, if you press the Power Switch for 0.
MENU ACCESSING THE MENU ASSISTANT FUNCTIONS MARK IMAGE COLOR SETTING SHORTCUT OTHER SETTING EXIT MONOCHROME FALSE COLOR CO- ZEBRA PEAK PEAK COLOR HISTOGRAM VOLUME BAR COLOR BAR CAMERA MODE RETURN OFF OFF OFF OFF RED OFF OFF OFF OFF V1.0 1) Press the Menu Button to display the menu. 2) Press< / >to select the desired menu. 3) Press to enter sub-menu, then press < / > to navigate to your choice, and < / > to adjust parameters. 4) Navigate to “RETURN” to return to main menu.
SPECIFICATIONS Model VS-2 FineHD 7.02” Panel 1920x1200 Resolution Display Brightness 1200:1 Contrast Viewing Angle (CR＞10) 160/160(H/V) 0.07875(mm)X 0.07875(mm) Pixel Pitch Input Audio Power HDMI Yes YPbPr Yes AV Yes Earphone Jack Φ3.
