User's Manual

-8-
1) Powered by AC
4. Powering up the Light
To disconnect the Neutrik® powerCON cable, pull back on the yellow release
tab on the cable connector, and rotate the connector counterclockwise.
Neutrik® powerCON
Male Connector
Neutrik® powerCON Female
Locking Connector
1
2
AC 100V-240V
~ ~
PUSH
Sizes (L*W*H) Weight
* The Quick-Release "Lightning Clamp" can clamp onto square or round pipe with a
diameter between 2-5cm or 0.79-1.97in.
670g / 1.48lbs 10.35x8.74x12.5cm / 4.07x3.44x4.92in
Specifications
2) Powered by Battery
You can also power this light via DC 24V-48V Power from a 3-pin XLR. This
can be done via our an Aputure Battery Power Station that supports 48V
output, or other power stations or block batteries that are capable of
outputting the same voltage.
Power Supply Box
PUSH
~ ~