User's Manual

PUSH

-7-

* The lamp controller interface schematic is shown in the pictures below:

Ground

Signal Pin-A

Signal Pin-B

18V

Power-Ground

3. Instructions for the Lightning Clamp

1) Clamp the Lightning Clamp onto a light stand.

2) To attach the control box, rotate the release lever to unlock the

quick-release baseplate, then mount the control box onto the Lightning

Clamp (the release lever will automatically spring back).

3) To remove the control box, grasp it ﬁrmly, then unlock the quick-release

plate by turning the release lever, and detach the control box.

4) For the Lightning Clamp Receiver on the back of the lamp head，the using

method of ﬁxing is similar with the Lightning Clamp.