User's Manual

-18-
2.4 Fixture Presets
2.3.7 Language
Press the MENU button to enter the system menu, rotate the INT control knob
to select Language, and press the INT control knob again to enter the
Language interface. rotate the INT control knob to select from the available
languages. Initial languages include "English" and "Chinese".
There are 4 preset buttons located on the bottom row of the control box.
Once you have set your light to the desired output, long press and hold one
of the four buttons (1, 2, 3, or 4) to start the Save Preset procedure. Use the
INT control wheel to select "YES" or "NO".
You can then use those preset buttons in any Lighting Mode and it will
activate the mode and settings you previously saved to that preset.
You can save a nearly infinite number of presets using the Sidus Link mobile
app.
2.3.8 Firmware Version
Press the MENU button to enter the system menu, rotate the INT control knob
to select Firmware Version, and press the INT control knob again to enter the
Firmware Version interface. Then Lamp Version number and Lamp Version
will appear.