User Manual

2) The DMX setting
3) The standard DMX console control
Control the Light Storm by the standard console within the same DMX channel setting as above.
*2) Press the DMX channel setting button (+/-) on the controller box to your needed DMX channel.
*1) Press DMX model setting button on the controller box to enter into the DMX model.
* Channel 1 is by default when in DMX model.
* DMX channel is between 1 and 512, but is between 1 and 511 for the Light Storm
LS 1c.
Tips and trouble setting
Please turn o the Light Storm LS 1 before removing batteries.
Please do not look at the Light Storm
LS 1 straightly, or it could damage your eyes.
Please do not keep touching the Light Storm
LS 1 over 5 minutes during lighting, or it could make
you injured.
Keep a distance of over 10 centimeters away from the Light Storm
LS 1 .
Suggest to take out of the button battery of the controller if do not use the controller for a long
period .
Warning:
Keep the UID correspondingly between light and controller box to ensure optimum
performance.
-10-