User Manual

-1-
Thank you for purchasing the Light Storm LS 1
The Light Storm LS 1 includes LS 1s and LS 1c. It is made of 1536 lamp beads which are designed and
manufactured carefully to have over 95 CRI value. Delicate design and elaborating production make a
robust but exquisite housing, which can fulll low forward heat of the xture.
LS 1 oers dual power
solutions. You can use V-Mount or Anton Bauer battery in a location shooting. Besides, adapter
attached is for your indoor shooting.
LS 1 is with the ability to adjust the brightness and the color
temperature (
LS 1c). Two antennas can cover all the surrounding within 360°. You can also control the
brightness and color temperature of
LS 1 by a DMX console which is under the standard DMX512
protocol. Light Storm, the best choice for your shooting.
Detailed product manual for Light Storm can be found on the movie solution page on www.aputure.com .
Instructions
Intended use
Intended use of the Light Storm LS 1 means:
Foreword
The user has read the instructions of this manual.
The user is using the products within the operating conditions and limitations described in this
product manual.
“Improper use” means using the products other than as described in these instructions or under
operating conditions which dier from those described herein.
Please read this product manual carefully.
Keep this product manual. Always includes this product manual when passing the products on to
the third parties.
Heed all warnings and follow all instructions in this product manual as stated.
Please do not disassemble or modify the Light Storm
LS 1, or it could result in electric shock or
product malfunction.
Please do not handle with wet hands or immerse in or expose to water or rain, or it could result in
re or electric shock.
Please do not use the Light Storm
LS 1 in the presence of ammable gas, or it could result in
explosion.
Please keep all liquids and ammable gas away from the Light Storm.
Keep away from strong sunlight or other high temperature, or it may explode.
Please do not damage, disassemble, drag or wind power cable. Do not place heavy things on the
Light Storm, or it may cause re or electric shock.
Please clean the Light Storm
LS 1 with a dry cloth.
Use of original Aputure cable accessories is recommended. Please note that this warranty does not
apply to repairs arising out of the malfunction of non-original Aputure accessories, although you
may request such repairs on a chargeable basis.
The product is certicated by ROSH, CE and FCC. Please operate the product in full compliance with
the operation standards. Please note that this warranty does not apply to repairs arising from
malfunction, although you may request such repairs on a chargeable basis.
The instructions and information in this manual are based on thorough, controlled company testing
procedures. Further notice will not be given if the design or specications change.