User Manual

06
Always remove the protection cover prior to turning on the light. Always re-install the cover
when packing it away.
2. Attaching/detaching the Reflector
Push the lever handle according to the arrow direction shown in the picture, and rotate the reflector
into it. Rotating in the opposite direction pulls out the reflector.
3. Setting up the light
Adjust the lamp body to the appropriate height, rotate tie-down to fix the lamp body on the tripod,
then adjust the lamp body to the required angel, and tighten the lock handle.
4. Soft light umbrella installation
Insert the soft light handle into the hole, then lock the locking knob.
*The soft light umbrella sold separately.
1 2