User's Manual

Rev: 0.1 Date:
23.
Copyright © 2013 Aptos Technology Inc.
 If the device is based on the FT2232, the Found New Hardware Wizard will
continue by installing the USB Serial Converter driver for the second port of the
FT2232 device. The procedure for installing the second port is identical to that
for installing the first port from the first screen of the Found New Hardware
Wizard. This is done automatically if the driver is Microsoft WHQL certified. If the
device is not based on the FT2232, the COM port emulation driver is loaded as
indicated in the following steps.
 The Found New Hardware Wizard will launch automatically to install the COM
port emulation drivers. As above, select "No, not this time" From the options and
click "Next" to proceed with the installation (Figure 2.6).
Figure 2.6
 Select "Install from a list or specific location (Advanced)" as shown in Figure 2.7
below and then click "Next".