Aptos Solar Panel Installation Manual

Installation Manual
High Efficiency Half-Cell Module
9
www.aptossolar.com | [e-mail] All Rights Reserved. DNA-120/144
Version: AS-IM-001
Junction Box Information
Overcurrent protection type: none
# of bypass diodes: 3
Diameter of cables: every module has 2 cables
whose diameter is 4mm
2
for any one of them, and
it can endure 90
o
C insulation and can be exposed
under sun light.
Ways of connecting
Every module with 2 connectors that are positive
electrode and negative electrode. When modules
are installed in series, the first positive connector
should connect with the negative connector of the
next module.
The modules are equipped with PV wiring
connectors that comply with the Standard for
Connectors for use in photovoltaic systems, UL
61730, the specific allowable mating connector
manufacturer and model number are listed as
below.
Mounting holes are 1/4 and 1/8 of the panel
length.