Transmitter-PLC Datasheet

Rev1.0 2020-4-7
TRANSMITTER-PLC
The APsmart Rapid Shutdown System Transmitter-PLC is part of a rapid shutdown solution when paired with
APsmart RSD-S-PLC, a PV module rapid shutdown unit. While powered on, the Transmitter-PLC sends a signal to
the RSD-S-PLC units to keep their PV modules connected and supplying energy.
RSD-S-PLC units automatically enter rapid shutdown mode when the Transmitter-PLC is switched off and resume
energy production when power is restored to the Transmitter-PLC. This solution complies with NEC 690.12
specifications for 2017 and supports the SunSpec signaling for rapid shutdown.
The Transmitter-PLC includes one or two cores and an optional power supply: 85-264VAC for residential,
180-550VAC for commercial.
Raising the bar in innovative
DC MLPE solar power systems
① RSD-S-PLC
② Transmitter-PLC
③ Inverter
 Meets NEC 2017 (690.12) requirements
 Switch off Transmitter-PLC, rapid shutdown
the output of PV modules
 Meets SunSpec requirements
 Equipped with single/dual core
 Optional 85-264VAC power supply
 Optional 180-550VAC power supply
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
2
3
1