Product Manual
Table Of Contents
- 1.Important Safety Instructions
- 2.APsystems Microinverter System Introduction
- 2.APsystems Microinverter System Introduction
- 3.APsystems Microinverter QS1 Introduction
- 4.APsystems Microinverter System Installation
- 4.1 Additional Installation components from APsyst
- 4.2 Required Parts and Tools from you
- 4.3 Installation Procedures
- 4.3.1 Step 1 - Verify the grid voltage to match wi
- 4.3.2 Step 2 - The AC bus distribution
- 4.3.3 Step 3 - Attach the APsystems Microinverters
- 4.3.4 Step 4 - Ground the system.
- 4.3.5 Stpe 5 - Connect the APsystems microinverter
- 4.3.6 Step 6 - Install a AC bus protective end cap
- 4.3.7 Step 7 - Connect APsystems Microinverters t
- 4.3.8 Step 8 - Complete the APsystems installation
- 5.APsystems microinverter system operating instru
- 6.Troubleshooting
- 7.Replace a microinverter
- 8.Technical Data
- 9.Wiring Diagram
- 10.QS1
QS1 Installation/User Manual
12
4.APsystems Microinverter System Installation
①. The layout of the mocroinverters' serial numbers on the warranty card is only suitable
for general arrangement.
②. Warranty card is located in Appendix last page of this manual.
③. You can use Scanning Gun or mobile phone to scan the serial numbers on the map when
set ECU (see ECU manual).
④. Using APsystems' mobile app ArrayApp can make the installation and
registration much more simple.
1 2
3
4 5 6 7
8
9 10 11 12 13 14 15 1716 18 19 20 2221
APsystems Microinverter&Energy Communication Unit
Warranty Card
The APsystems Installation Map is a diagram of the physical location of each microinverter in your PV installation.
Each APsystems microinverter has a removable serial number label located on the mounting plate. Pee l the label
and affix it to the respective location on the APsystems installation map.
Installation Map Template
To register your APsystems microinverter, please mail this warranty registration card to: emasupport@altenergy-power com.
B A
B A
B A