User's Manual

APsystems ECU-R Installation/User Manual

3. Hardware Installation

3.1 Preparation

Make sure you have the following components ready before

beginning to install the ECU-R:



A dedicated standard AC electrical outlet (located as close to the

array as is possible).

 A broadband Internet connection available for your use.



A broadband router with either a CAT5 Ethernet, or a wireless

router.

 A phone with APP (see page 11).

3.2 Selecting an Installation Location for the ECU-R



Choose a location that is as close to the array as possible

3.3 Installation

1) Using a Wall Mount

When mounting the ECU-R to a wall, make sure to select a cool, dry

indoor location.



Depending on the wall surface you are mounting the ECU-R to, use

either two drywall screws or wall anchors, installed 100 mm apart

(The drywall screws and wall anchors are not included in the ECU-R

kit).

 Align and slide the ECU-R onto the mounting screws.

Figure 4