User and installation manual

APsystems ECU-R Installation/User Manual
10
3. Hardware Instrallation
2）Power Distribution Cabinet Installation
 Install the socket on the guide rail (The socket will not be supplied by APsystems
Please prepare it yourself).
 Connect the adapter to the power connection port on the top of the ECU-R.
Figure 7
Do not put the antenna inside a metal box, that will block the signal.
If ECU-R is placed in ditribution box or the roof is metal, please use this long cable antenn
as, and put them outside the box or on roof.
The long cable antenna (2.4G) is common in market,can be purchased in electrical
store or online store.