RSD Start Kit Datasheet

19925 Stevens Creek Blvd, Suite 100, Cupertino, CA 95014
[phone] | [e-mail] | APsmartGlobal.com
TEST SETUP AND PROCEDURE
① As shown above, connect RSD START KIT in series between PV string and PV Analyzer。
② Use the 12Vdc mobile power supply to power the RSD START KIT through USB port on the side.
③ Wait for 10s after the power LED light on, start IV curve test with the PV Analyzer.
TECHNICAL DATA
Input Voltage
12Vdc
Input Current
0.8A
Power Supply
5.5X2.1 mm DC power connector
Operating Temperature Range
-40℃~+60℃
Enclosure Rating
IP30
Dimensions
140mmx170mmx95mm
Weight
550g