RSD-D Installation & User Manual

User Manual
8
RSD-D INSTALLATION
Step 2. Connect the INPUT1 connectors of the RSD-D to the first PV module junction
box and connect the INPUT2 connectors to second PV module, the device DC output
voltage is within the range of 1.2 ~ 2v.
NOTE: Do not short-circuit the RSD-D output connectors, otherwise it will be damaged.
RSD-D cable length
Note: The output cable length of triad junction box PV module should be no less than 1.2m.
Note: The output cable length of integrated junction box PV module should be no less than 0.9m.
≥1.2m
≥0.9m