Installation & User Manual

User Manual
6
RSD-D INSTALLATION
INSTALLATION NOTES
Installation MUST comply with local regulations and technical rules：
① Perform all electrical installations in accordance with local codes.
② Be aware that only qualified professionals should install and/or replace the RSD-D.
③ Before installing or using an RSD-D, please read all instructions and warnings in the technical
documents and on the inverter system itself as well as on the PV array.
④ Be aware that installation of this equipment includes the risk of electric shock.
⑤ Do not touch any live parts in the system, including the PV array, when the system has been
connected to the electrical grid.
⑥ Ensure the PV module and inverter have been disconnected before installing an RSD-D.
① Be sure to verify the voltage and current specifications of your PV module match with those of
the RSD-D.
② The maximum open circuit voltage of the PV module must not exceed the specified maximum
input voltage of the APsmart RSD-D.
Additional installation components from APsmart
· DC extension cable (sold separately)
Required parts and tools to complete the installation
In addition to your PV array and its associated hardware, you will need a torque wrench and a Phillips
screwdriver.