Installation & User Manual

User Manual
11
TRANSMITTER-PLC INSTALLATION
Note: Install the RSD-D before powering the Transmitter-PLC.
Note: The waterproof jacket and related accessories are not configured before delivery and customers need to
buy by themselves.
• Pass either positive or negative cables through cores (either both positive cables or both negative cables.
Do not use one positive and one negative cable.)
• Connect wires to AC side of power supply
Max number of Strings Per Core :
DC cable Diameter(without connector)
Φ5.9mm
Φ6.35mm
Φ7mm
Φ8.6mm
29mm Core
≤15
≤15
≤14
≤10
11mm Core
≤6
≤5
≤4
≤2
Max string length : 30 modules
Max current per core : 150A
Max cable length from inverter(+) to inverter(-) : 1000ft (300m)