Installation Instructions

18 / 32
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
23.02.2021
Version 1.19.0
Technical data
APS-90, APS-180 and APS-90-Outdoor-PoE
Characteristics
Pin allocation on device
Fig. 11: USB interface
(arrow "A": optics orientation
for APS-180)
Supply voltage
Ethernet
Pin no. Name Description
11 IN2 - Programmable input -, potential-free
12 DID4 B Code jumper 4
13 DID3 B Code jumper 3
14 DID2 B Code jumper 2
15 DID1 B Code jumper 1
3.2.3
USB
This USB 2.0 interface (Hi-Speed, max. 480 MBit/s) is intended for connecting storage
media and other devices.
Pin no. Name Description
1 VCC 5 V, max. 500 mA
2 D- Data -
3 D+ Data +
4 GND Ground
3.3
Electrical data
Category Description
Input voltage U
PoE
(PD class 0) via Ethernet 36 .. 57 V DC
Power consumption P
IN
(without USB load) 6 W (125 mA at 48 V DC)
APS-90
APS-180
APS-90-Outdoor-
PoE
Transfer rate 100 / 1000 MBit/s 10 / 100 MBit/s
Cable length, maximum 100 m (328 )
Connector type (APS/PC) RJ-45 M12
D-coded, 4-pin,
female