Assembly Instructions

26 / 36
The reproduction, distribution and utilization of this document as well as the communication of its contents
to others without express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
02.06.2022
Version 1.0
Installation
APS-90-Lite
B
Basi
c
c Configuratio
n
n Fusio
n
n Clients
Configuring the clients
1.
Configure a client device as fusion client.
2.
Scan for fusion host device.
󰶐
List of all host devices is shown.
3.
Select the host device.
󰶐
The status of the connection changes to [working].
4.
Repeat for all other clients.
Automati
c
c Configuration
The automatic configuration determines the positions and arrangement of the devices in
relation to each other.
The automatic configuration has 2 modes:
Random Motion Preferred mode. A great number of people are walking
through the area. This variant can take place during
normal operation, but it takes longer. The time depends
on the number of people.
Controlled Path A few people walk on defined paths through the area.
This variant is faster, but it needs an empty area. The
walking people have to stay 2 s or more in the overlap-
ping areas of the devices. The path depends on the array
(໊Examples for Controlled Path on page 26).
1.
Select the fusion host device.
󰶐
The status of the client devices has changed to [unconfigured].
2.
Start Automatic Configuration.
󰶐
When the configuration is finished the status of the fusion clients changes to
[configured].
3.
Configure the counting lines and monitored zones.
Example
s
s fo
r
r Controlle
d
d Path
Start in one direction, turn around and repeat till the status of the fusion client devices is
configured. Stay 2 s or longer in the overlapping areas (O).