Assembly Instructions

19 / 36
The reproduction, distribution and utilization of this document as well as the communication of its contents
to others without express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
02.06.2022
Version 1.0
Installation
APS-90-Lite
5 INSTALLATION
5.1 Requirements
M
Mountin
g
g Position
Consider the following requirements when selecting the mounting position:
Fig. 10: Mounting position
ࡇ Ensure that the mounting position and the holder / protective housing provide suffi-
cient stability.
ࡇ Ensure that the mounting position is in the right place:
ࡒ As much as possible, the view between the device and people's heads should be
unobstructed.
ࡒ As much as possible, the monitored area (Fig. 10 /2) must be free of interfering
objects.
ࡒ The flow of persons in a monitored area should be through the center.
ࡒ
Place the device (Fig. 10 /1) above the end of the door swing area, because the
counting lines must be set around that door swing area.