User`s guide

Apriva

BT200-T Device Utility for RIM

Mobile Devices Installation and User’s Guide

Installing the Reader USB Driver

If you are using a USB connection to charge the battery (not a wall charger),

and the battery does not seem to be charging, or if it takes more than one hour

to charge, you might need to install the Apriva USB driver.

To install the USB driver and recharge the reader:

1. Download the USB driver from the Apriva downloads website. For driver

download information, see Apriva Technical Support on page 30.

2. Connect the reader to the computer with the USB cable to start the driver

installation wizard.

3. Follow the wizard instructions to install the USB driver.

After installing the driver, connect the reader to the computer with the USB

cable to charge the reader.