User`s guide

Apriva

BT200-T Device Utility for RIM

Mobile Devices Installation and User’s Guide

Viewing the Reader Battery Level

After the reader is paired with the mobile device (see Pairing the Reader to the

Mobile Device on page 10), you can view the reader battery level from the

Apriva Device Utility menu.

NOTE: To keep the reader functioning properly, make sure the battery level is

always at least 50%.

To view the battery level:

1. Power on the reader.

2. Insert the smart card.

3. Press the menu key ( ).

4. Use the trackpad to navigate to and select Downloads ( ) > Apriva

Device Utility ( ).

5. Press the trackpad to select the Apriva Device Utility line. The Apriva

options screen appears.

6. Either use the trackpad to scroll to Device Battery Millivolts or press

the lowercase b on the keyboard.

7. Press the trackpad to select the option. Battery voltage results are

displayed in millivolts (1000 millivolts = 1 volt), as shown in Figure 18.

Figure 18 – Battery voltage screen