User`s guide

Apriva

BT200-T Device Utility for RIM

Mobile Devices Installation and User’s Guide

Viewing the Device Revision Number

You can view the device revision number and update the firmware on the

reader if applicable. If the reader revision is current, the screen only shows the

revision number. If the reader firmware version is an earlier version than the

version stored on the mobile device, you are prompted to “flash” the reader

firmware, as described below.

To view the device revision number:

1. Power on the reader.

2. Insert the smart card.

3. Press the menu key ( ).

4. Use the trackpad to navigate to and select Downloads ( ) > Apriva

Device Utility ( ).

5. Press the trackpad to select the Apriva Device Utility line. The Apriva

options screen appears.

6. Either use the trackpad to scroll to Device Revision or press the

lowercase r on the keyboard.

7. Press the trackpad to select the option and display the version number.

If the reader firmware is an earlier version than what is shown in the Apriva

Device Utility version, you are prompted to flash the reader.

To flash (update) the reader firmware version:

1. While you are in the Device Revision screen, either use the trackpad to

scroll to Factory Flash or press uppercase F on the keyboard.

2. Press the trackpad to select the option. If the Apriva Device Utility reader

firmware version installed on the mobile device is a later version than

what is installed on the reader, the firmware is updated on the reader.

The flash operation takes 45 to 60 seconds.