User`s guide

Apriva

BT200-T Device Utility for RIM

Mobile Devices Installation and User’s Guide

Using the Mobile Device in Tethered

USB Mode

You can disable Bluetooth (wireless) mode and use the reader in tethered

USB mode. Tethered USB mode prevents wireless RF emissions, which is

useful in situations where RF emissions are not allowed, such as airplanes or

Sensitive Compartmented Information Facilities (SCIFs).

NOTE: The devices must be paired before you can switch between USB and

Bluetooth modes. See Pairing the Reader to the Mobile Device on page 10.

To use the mobile device in tethered USB mode:

Connect the USB cable from the reader to the mobile device. Use the

supplied adapter if necessary. The mobile device automatically switches

to USB mode.

To switch from USB mode to Bluetooth (wireless) mode:

Remove the USB cable from the reader and the mobile device. The

mobile device automatically switches from USB mode to Bluetooth

mode.