User`s guide

Apriva

BT200-T Device Utility for RIM

Mobile Devices Installation and User’s Guide

Deleting a Currently Paired Device

You can delete paired devices.

To delete a currently paired device:

1. Select the device shown, and then use the trackpad to scroll to and

select Delete Device.

2. Select Delete, and then press the trackpad again to delete the device.

Testing the Reader Connection

You can test the reader connection to verify that it is communicating with the

mobile device.

To test the reader connection:

1. Power on the reader.

2. Insert the smart card.

3. Press the menu key ( ).

4. Use the trackpad to navigate to and select Downloads ( ) > Apriva

Device Utility ( ).

5. Press the trackpad to select the Apriva Device Utility line. The Apriva

options screen appears.

6. Either use the trackpad to scroll to Test Device or press the lowercase t

on the keyboard.

7. Press the trackpad to activate the test. Test results display after a few

seconds. Following are example test result screens. The image on the

left shows a good reader connection. The image on the right shows a

failed reader connection.

8. NOTE: The last line of the “good” test shows the connection type. If the

mobile device is connected to the reader with a USB cable, the Channel

Type is USB. Otherwise, the Channel Type is Bluetooth. See Figure 11.

Figure 11 – Bluetooth connection test messages