User`s guide

Apriva

BT200-T Device Utility for RIM

Mobile Devices Installation and User’s Guide

6. Press the trackpad to select the Apriva Device Utility line. The Apriva

options screen appears.

7. Either use the trackpad to scroll to Bluetooth Pair or press uppercase B

on the keyboard.

8. Press the trackpad to select the option. If the connection is successful,

the message shown in Figure 10 appears, and both LEDs on the reader

flash rapidly (for about 90 seconds) to indicate that the reader is ready

for pairing. You must pair the reader with the mobile device before

the timer expires (steps 9 through 15). If the timer expires, you must

repeat this step.

Figure 10 – Pairing message

9. Press the Escape key twice on the mobile device to return to the main

menu.

10. Use the trackpad to navigate to and select Options > Bluetooth. If the

mobile device shows that it is currently paired with another Apriva

Reader, you must delete the device before you can pair the new device.

See the following section, Deleting a Currently Paired Device.

11. Press the trackpad, and then select Add Device. Press the trackpad

again to display the Add Device options menu.

12. Press the trackpad to select Search. The mobile device searches for

devices. “Apriva BT Reader” is displayed. If this does not display, the

timer has expired and you must repeat this procedure from step 4.

13. Press the trackpad. You are prompted for a passkey. The passkey is

automatically on the mobile device clipboard. Do not use the

keyboard to enter one.

14. Enter the passkey by pressing the Shift button on the keyboard, and

then press the trackpad to enter the passkey stored on the clipboard.

15. Press the trackpad again to complete the pairing operation.