User`s guide

Apriva

BT200-T Device Utility for RIM

Mobile Devices Installation and User’s Guide

Using the Apriva Device Utility

Most of the features described in the following sections require you to pair the

devices first. See Pairing the Reader to the Mobile Device on page 10.

The following sections cover Apriva Device Utility options available on the

mobile device:

• Viewing the Apriva Device Utility Menu below

• Pairing the Reader to the Mobile Device on page 10

• Testing the Reader Connection on page 12

• Using the Mobile Device in Tethered USB Mode on page 13

• Viewing the Apriva SmartReader Version Number on page 14

• Viewing the Device Revision Number on page 15

• Using Reader Sessions on page 16

• Importing Certificates on page 18

• Viewing the Reader Battery Level on page 20

• Viewing the Reader Serial Number on page 21

Viewing the Apriva Device Utility

You can view all of the reader settings from the Apriva Device Utility menu.

To view the Apriva Device Utility menu:

1. Press the menu key ( ).

2. Use the trackpad to navigate to and select Downloads ( ) > Apriva

Device Utility ( ).

3. Press the trackpad to select the

Apriva Device Utility line. The

Apriva options screen appears.

See Figure 9.

Figure 9 – Apriva options screen