User`s guide
Table Of Contents
- Front Cover
- Title Page
- Notice
- Contents
- Figures
- Tables
- Introduction
- Apriva BT200-T Reader
- Support
- Back Cover
Apriva
®
BT200-T Smart Card Reader for Windows Mobile
®
Version 6.x Installation and User’s Guide
© Copyright 2010 Apriva. Page 2 September 2010
Hardware and Software
Requirements
The following sections describe hardware and software requirements.
Hardware Required
The following hardware is required:
• Apriva BT200-T Bluetooth Smart Card Reader
• Mobile device
• Smart card
• USB cable with mini adapter
• Computer with Windows platform operating system (Windows XP,
Windows Vista, or Windows 7) for transferring files to the mobile device
or charging the battery.
NOTE: You cannot charge the reader battery with computers that use
Windows Vista or Windows 7 operating systems. See Charging the
Reader Battery on page 9.
Software and Firmware Required
The following software and firmware are required:
• AprivaReader<vxx_xx_xxxx-date>.bin, where “<xx_xx_xxxx>” is the
version number
• AprivaSmartCardDriver.<xx.xx.xx>.cab, where “<xx.xx.xx>” is the version
number
• Microsoft ActiveSync or Windows Mobile Device Center
• Windows Mobile version 6.x (except version 6.5, which is currently not
supported)