User`s guide

Apriva
®
BT200-T Smart Card Reader for Windows Mobile
®
Version 6.x Installation and User’s Guide
© Copyright 2010 Apriva. Page 15 September 2010
Reader LED Descriptions
Table 3 describes reader LED indications and their meanings.
Action Indication Meaning
Reader powered
on using power
button
Solid GREEN and
solid RED for about
two seconds
Normal power on indication while reader
completes self test.
Battery test mode
(about four
seconds)
Solid GREEN
Battery over 75% charged, ready for
reader operations.
Rapid GREEN
blinking (two per
second)
Battery between 25% and 75% charged,
ready for reader operations.
Rapid RED blinking
(two per second)
Battery less than 25% charged, you
should charge before use.
After four seconds
both LEDs turn off
Normal transition to reader ready mode.
Reader ready
mode
GREEN blinking
(every four
seconds)
No USB or Bluetooth connection,
battery over 25% charged.
RED blinking
(every four
seconds)
No USB or Bluetooth connection,
battery less than 25% charged.
GREEN blinking
(every one second)
USB or Bluetooth connection, battery
over 25% charged.
RED blinking
(every one second)
USB or Bluetooth connection, battery
less than 25% charged.
Power down mode GREEN and RED
solid for about two
seconds then both
turn off
Power down indicates power switch
pressed, card removed, reader not
paired, no Bluetooth or USB connection,
or inactivity timer expired.
Reader charging
mode
(Reader is
connected to a
charger or a
computer through a
USB cable)
Solid GREEN
blinking off every
four seconds
No USB or Bluetooth connection, reader
charging.
NOTE: If the reader is off when the
cable is inserted, the reader will power
on.
Table 3 – Reader LED descriptions