User`s guide

Apriva
®
BT200-T Smart Card Reader for Windows Mobile
®
Version 6.x Installation and User’s Guide
© Copyright 2010 Apriva. Page 13 September 2010
Viewing Reader Versions
The Version tab shows the driver and reader version information.
Viewing Reader Information
To view reader information:
1. From the mobile device applications menu, select the Apriva Reader
icon ( ). The Apriva Smart Card Reader screen appears.
2. Select the Version tab to view version information. See Figure 7.
Figure 7 – Driver and reader version screen
Updating the Firmware
If the reader version is an earlier version that the version downloaded in
Installing the Reader Driver on the Mobile Device on page 4, update the
reader firmware.
NOTE: If you have downloaded a newer firmware version from the Apriva
Secure Download website, be sure it is the correct version for the device
before installing it on the reader.
To update the firmware:
1. From the mobile device applications menu, select the Apriva Reader
icon ( ). The Apriva Smart Card Reader screen appears.
2. Select Update. The firmware version screen appears.
3. If applicable, select the most recent firmware version from the list. If the
firmware installed on the reader is an earlier version than the one
selected, the firmware is updated.